Fluke BC190/830 190 Series Mains Power Adapter
The BC190/830 is a universal mains-power adapter for measurement, control, and laboratory equipment. The Adapter is intended for operating and charging the Fluke 190-Series ScopeMeter Test Tool. The Adapter is based on the switched-mode concept for high efficiency, low stand-by power consumption, and complies with level-VI requirements. It operates in a wide range of input voltages from 100 Vac up to 240 Vac nominal. A universal set of mains cords is included to make the Adapter suitable for most types of mains outlet.
Specifications:
Input Nominal voltage: 100 Vac to 240 Vac, ±10 %
Input current: 0.35 A at max. load
Nominal input frequency: 50/60 Hz ±10 %
Mains inlet: IEC 60320-1 type C8
Input power, no load: <0.1 W (@ 115 / 230 Vac)
Output voltage: 18 Vdc ±5 %
Output current: 0 mA to 840 mA
Output cable length: 2 m (6.5 ft)
Output connector: 5 mm outer diameter, per DIN45232
Output polarity: Inner contact negative, outer contact positive









