Fluke 773 Milliamp Process Clamp Meter
 
Key Features:
 
 
Best in class 0.2 % accuracy
 
0.01 mA resolution and sensitivity
 
Measure 4 to 20 mA signals without "breaking the loop"
 
Measure mA signals for PLC and control system analog I/O
 
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
 
Measurement Spotlight illuminates hard to see wires in dark enclosures
 
Detachable clamp with extension cable for measurements in tight locations
 
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
 
Automatically change the 4 to 20 mA output for remote testing
 
Power saving features, auto-off, backlight timeout extend battery life
 
Hold function captures and displays changing measurements
 
Measure 4 to 20 mA signals with in-circuit measurement
 
Simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters
 
Source 4 to 20 mA signals for testing control system I/O or I/Ps
 
mA output linear ramp or 25% step output
 
DC voltage measurement to verify 24V power supplies or voltage I/O signals
 
Source DC voltage to test input devices that accept 1-5V or 0 to 10V signals
 
Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp
 
Enables milliamp signal logging to a separate logging device without breaking the loop
 
Output mA signal enables a logging DMM or other device to record the 4-20 mA signal without breaking the loop
 
mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal
 
Apply a mA input signal to a device and measure its 4-20 mA output on devices such as valves or mA isolators
 
Voltage output linear ramp or 25% step output
 
 
Included Accessories:
 
 
Four AA alkaline batteries (installed)
 
Soft carrying case
 
TL75 test leads
 
AC 72 detachable clip
 
TL 940 mini hook test leads
 
Instruction sheet
 
Hanging tool with hook and loop strap