Fluke 190-062 ScopeMeter
The Fluke 190-062 ScopeMeter offers the high performance of an oscilloscope with portability and the highest safety ratings, for use in difficult industrial conditions. This test tool is suitable for just about any troubleshooting task, with a 5.0GS/s and 200 ps resolution which can capture noise and other potential issues. The ScopeMeter is protected with an IP51 rating, meaning it is prepared to deal with fluctuating temperatures, as well as water droplets, dust, and humidity. This is ideal for a range of job sites, with this hand-held tool an excellent choice for field service professionals.
The 190-062 has been designed for use amongst the electromechanical industrial sector, and can be used for testing on Actuators, Linear Motors, Pressure-Level-Flow-Position Sensors, and Packaging Equipment. With a bandwidth of 60MHz, two scope modes, and the ability to run power measurements, you can be sure that the oscilloscope is fit for the task. When in 'Scope' mode, the 190-062 can store up to 10,000 samples per channel, which allows for the capture of accurate and detailed waveforms. These results can then be compared and contrasted to consolidate your findings.
The Oscilloscope is also equipped with these exciting features:
- Connect-and-View - this automatically sets up correct triggering by recognising signal patterns. The user does not even need to touch a button, yet a stable, reliable, and repeatable display of almost any signal is shown.
- TrendPlot - this acts as a paperless recorder that stores data for up to 22 days, allowing users to detect intermittent faults. These are often difficult to pinpoint, yet the ScopeMeter can locate these issues.
- ScopeRecord - the memory of ScopeRecord can store up to 30,000 or more data points per channel, which can catch intermittents and glitches as short as 8 nanoseconds.
Fluke Selection Guide - Decide What Is Best for You
| Features | 123 | 124 | 125 | 190-062 | 190-102 | 190-202 | 190-104 | 190-204 | 190-504 |
|---|---|---|---|---|---|---|---|---|---|
| Bandwidth (MHz) | 20 | 40 | 40 | 60 | 100 | 200 | 100 | 200 | 500 |
| Scope Inputs | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 4 | 4 |
| Dedicated DMM | 2 | 2 | 2 | 1 | 1 | 1 | - | - | - |
| Dual Input Trendplot | Yes | Yes | Yes | Yes | Yes | Yes | - | - | - |
| Four Input Trendplot | - | - | - | - | - | - | Yes | Yes | Yes |
| ScopeRecord Mode | - | - | - | Yes | Yes | Yes | Yes | Yes | Yes |
| Automatic Capture & Replay | - | - | - | Yes | Yes | Yes | Yes | Yes | Yes |
| Cursors | - | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Zoom | - | - | - | Yes | Yes | Yes | Yes | Yes | Yes |
| Bus Health Test Mode | - | - | Yes | - | - | - | - | - | - |
| Advanced Power Measurements | - | - | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| CAT III Safety Rating | 600V | 600V | 600V | 1000V | 1000V | 1000V | 1000V | 1000V | 1000V |
| CAT IV Safety Rating | - | - | - | 600V | 600V | 600V | 600V | 600V | 600V |
| Battery | 7 hr NiMH | 7 hr NiMH | 7 hr NiMH | 4 hr Li-Ion | 4 hr Li-Ion | 7 hr Li-Ion | 7 hr Li-Ion | 7 hr Li-Ion | 7 hr Li-Ion |
| Isolated USB | Opt | Opt | Opt | Yes | Yes | Yes | Yes | Yes | Yes |
Key Features
- CAT III 1000V / CAT IV 600V safety rated
- 60MHz bandwidth
- 5.0GS/s sampling rate
- 10,000 samples per channel waveform capture
- Connect-and-View for automatic triggering
- ScopeRecord mode that captures waveform sample data
- TrendPlot offers trend measurement readings up to 22 days
- Advanced automatic measurements of power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
- IP51 rating for harsh environments
- Li-Ion battery for extended operating time
